Pressure-sensitive systems:

     “ANCHOR-CAL-1 or -4”, removable intact PVC label. Affixed to aluminum, stainless steel, acrylonitrile butadiene styrene (ABS) plastic and alkyd enamel, maximum temperature 60° C (140° F). Suitable where exposed indoors to high humidity or occasional exposure to water.

     “ANCHOR-CAL-2 or -5”, removable intact POLYCARBONATE label. Affixed to aluminum, stainless steel, acrylonitrile butadiene styrene (ABS) plastic and alkyd enamel, maximum temperature 80° C (176° F); minimum temperature -40° C (-40° F). Suitable for indoor or OUTDOOR use.

     “ANCHOR-CAL-4" and "ANCHOR-CAL-5” use 3M adhesive and are also approved for Galvanized Steel, Porcelain, Nylon, and Polyphenylene oxide/ether.

     “ANCHOR-CAL-3”, removable intact POLYCARBONATE label with SELECTIVELY PRINTED
ADHESIVE. Affixed to aluminum, stainless steel, acrylonitrile butadiene styrene (ABS) plastic and alkyd enamel, maximum temperature 80° C (176° F). Suitable where exposed indoors to high humidity or occasional exposure to water.

     “INFOFOIL”, removable intact ALUMINUM label. Affixed to aluminum, galvanized steel, stainless steel, alkyd enamel and porcelain, maximum temperature 150° C (302° F); polycarbonate plastic, maximum temperature 100° C (212° F): polyphenylene oxide and acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 80° C (176° F) . Suitable where exposed indoors to high humidity or occasional exposure to water.

     “INFOTAG SILVER”, “INFOTAG WHITE”, removable intact POLYESTER labels. Affixed to stainless steel, galvanized steel, aluminum, alkyd enamel, acrylic paint, polyester paint, epoxy paint and porcelain enamel, maximum temperature 150° C (302° F); phenolic, polycarbonate and nylon plastic, maximum temperature 100° C (212° F): polypropylene and polystyrene plastic, maximum temperature 80° C (176° F); acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 60° C (140° F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for printing using certain ribbon inks.

Marking:
Company name and label designation on label packaging.

For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories, Inc.